| Ground Clearance | 1.23ft in |
|---|---|
| Ground Clearance - Bumper | 2.19ft in |
| Height - Top Of Beacon | 12.95ft in |
| Height - Top Of Cab Roof | 11.98ft in |
| Height - Top Of Exhaust Pipe | 10.97ft in |
| Height - Top Of Hood | 8.42ft in |
| Length - With Blade On Ground | 23.48ft in |
| Width Over Wheels | 10.64ft in |
| Wheel Base | 10.99ft in |
| Net Power | 248hp |
| Displacement | 427.8cu in |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
| Engine Model | Cat C7.1 ACERT: configured for two emissions options |
| High Idle Speed | 2270rpm |
| Low Idle Speed | 800rpm |
| Operating Weight | 49353lb |
| Transmission Type | Planetary Powershift ECPC |
| Travel Speeds - Forward - First | 4.2mph |
| Travel Speeds - Forward - Second | 7.5mph |
| Travel Speeds - Reverse - First | 4.8mph |
| Travel Speeds - Reverse - Second | 8.5mph |
| Travel Speeds - Forward - Third | 13.2mph |
| Travel Speeds - Reverse - Third | 15mph |
| Outside Diameter | 4.7ft in |
| Drum Diameter | 3.4ft in |
| Drum Width | 3.3ft in |
| Tips Per Wheel | 60 |
| Weight | 9720lb |
| Width - Over Drums | 10.7ft in |
| Front | Planetary-Fixed |
| Rear | Planetary Oscillating |
| Oscillation Angle | 10 degrees |
| Maximum Supply Pressure | 2930 psi |
| Main Relief Pressure | 3190 psi |
| Pump Flow At 2,111 Rpm | 23.5 gal/min |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
| Fuel Tank | 132.1gal |
| Engine Crankcase | 5.3gal |
| Transmission | 14.8gal |
| Note | All non-road Tier 4 Final and Stage IV diesel engines are required to use: Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up |
| Hydraulic Tank Only | 19.8gal |
| Steering System - Circuit | Closed Center Load Sensing |
| Steering System - Pump | Piston, variable displacement |
| Steering Pressure Limited | 4003 psi |
| Bore | 4in |
| Stroke | 23.5in |
| Maximum System Flow | 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm) |
| Vehicle Articulation Angle | 84 degrees |
| Height - Including Cutting Edge | 2.9ft in |
| Maximum Depth Of Cut | 0.8ft in |
| Maximum Lift Above Ground | 2.7ft in |
| Width - Over End Bits | 12.4ft in |
| Blade Tilt Adjustment - Right | 1ft in |
| Blade Tilt Adjustment - Left | 1.2ft in |
| Total Tilt Adjustment | 2.2ft in |
| Width - Moldboard Length | 12ft in |
| Operator Sound Level (Iso 6396) | 70 dB(A) |
