| Ground Clearance | 1.4ft in |
|---|---|
| Width Over Wheels | 11.98ft in |
| Height To Top Of Cab | 12.32ft in |
| Wheelbase | 12.14ft in |
| Height - Bottom Of Ladder | 1.6ft in |
| Height - Rear Bumper | 3.1ft in |
| Height - Top Of Cab | 12.3ft in |
| Height - Top Of Exhaust Pipe | 144in |
| Blade Height - Straight | 3.39ft in |
| Length - With Blade On Ground | 27.7ft in |
| Wheel Base | 12.1ft in |
| Height - Top Of Hood | 105.6in |
| Blade Width - Straight | 14.4ft in |
| Width - Over Drums | 11.98ft in |
| Turning Radius Blade - Inside | 11ft in |
| Fuel Tank Capacity | 159.3gal |
| Engine Make | 2236 |
| Gross Power | 401hp |
| Net Power | 354hp |
| Power Measured @ | 1800rpm |
| Displacement | 928cu in |
| Bore | 5.4in |
| Stroke | 6.7in |
| Engine Model | Cat C15 ACERT |
| Flywheel Power | 354hp |
| Eec 80/1269 | 354hp |
| Sae J1349 | 350hp |
| Iso 9249 | 354hp |
| Fuel Capacity | 159.3gal |
| Engine Oil Capacity | 9gal |
| Cooling System Fluid Capacity | 22gal |
| Transmission Fluid Capacity | 16.4gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 95amps |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed | 10.7mph |
| Forward - 1 | 3.3mph |
| Forward - 2 | 5.8mph |
| Forward - 3 | 9.7mph |
| Reverse - 1 | 3.8mph |
| Reverse - 2 | 6.6mph |
| Reverse - 3 | 10.7mph |
| Front Wheels Drum Width | 44.3in |
| Operating Weight | 72164lb |
| Front Wheels Drum Diameter | 51.2in |
| Rear Wheels Drum Width | 44.3in |
| Rear Wheels Drum Diameter | 51.2in |
| Outside Diameter | 5.5ft in |
| Drum Diameter | 4.3ft in |
| Drum Width | 3.7ft in |
| Wheel Weight | 3893lb |
| Relief Valve Setting | 3500 psi |
| Front | Fixed |
| Rear | Oscillating 9 |
| Lift Cylinder Bore X Stroke | 95.25 mm x 711 mm (3.7 in x 28 in) |
| Cooling System | 21.9gal |
| Fuel Tank | 159gal |
| Crankcase | 9gal |
| Transmission | 16.4gal |
| Rops/Fops | Meets SAE and ISO standards |
| Standards | Meets ANSI/SAE, SAE and ISO requirements |
| Blade Tip Angle - Total | 13.5degrees |
| Moldboard Length | 14.4ft in |
| Height - Including Cutting Edge | 3.4ft in |
| Maximum Depth Of Cut | 1.1ft in |
| Maximum Lift Above Ground | 3.1ft in |
| Width - Over End Bits | 15.2ft in |
| Total Tilt Adjustment | 2.6ft in |
| Blade Tip Angle - Back | 6.6degrees |
| Blade Tip Angle - Forward | 6.9degrees |
| Blade Tilt Angle - Right Full | 10degrees |
| Blade Tilt Angle - Left Full | 10degrees |
| Weight | 68796lb |
| Height | 12.4ft in |
| Width | 14.4ft in |
