| Length W/ Blade | 14.23ft in |
|---|---|
| Width Over Tracks | 6.76ft in |
| Height To Top Of Cab | 8.96ft in |
| Length Of Track On Ground | 10.45ft in |
| Ground Clearance | 1.26ft in |
| Track Gauge | 5.09ft in |
| Standard Shoe Size | 20.08in |
| Ground Pressure - Xl | 5.37 psi |
| Ground Contact Area - Xl | 3663in2 |
| Length - Track On Ground - Lgp | 91in |
| Length - Track On Ground - Xl | 91in |
| Ground Contact Area - Lgp | 4741in2 |
| Number Of Shoes Per Side | 39 |
| Shoe Width - Lgp | 26in |
| Shoe Width - Xl | 20in |
| Track Gauge - Lgp | 68in |
| Track Gauge - Xl | 61in |
| Ground Pressure | 5.39psi |
| Ground Contact Area | 36631225.01in2 |
| Ground Pressure - Lgp | 4.31 psi |
| Ripper Type | Parallelogram |
| Number Of Shanks | 3 |
| Maximum Digging Depth | 13.3in |
| Maximum Reach - Ground Line | 24in |
| Gross Power | 99hp |
| Net Power | 90hp |
| Displacement | 305cu in |
| Bore | 3.7in |
| Stroke | 4.7in |
| Engine Model | Cat 3046T |
| Eec 80/1269 | 90hp |
| Sae J1349 | 90hp |
| Iso 9249 | 90hp |
| Power - Gross | 99hp |
| Power - Net | 90hp |
| Caterpillar | 90hp |
| Operating Weight | 20547.1lb |
| Fuel Capacity | 49.5gal |
| Cooling System Fluid Capacity | 4.3gal |
| Engine Oil Capacity | 3.5gal |
| Final Drives Fluid Capacity | 3.9gal |
| Max Speed - Forward | 5.6mph |
| Max Speed - Reverse | 6mph |
| Drive Pumps | 2 |
| Track Motors | 2 |
| Relief Valve Settings | 6380 psi |
| Maximum Travel Speed - Forward | 5.6mph |
| Maximum Travel Speed - Reverse | 6mph |
| Operating Weight - Lgp | 20434lb |
| Operating Weight - Xl | 19662lb |
| Blade Width - Xl | 105.9in |
| Blade Width - Intermediate | 115in |
| Blade Width - Lgp | 128.1in |
| Blade Height - Xl | 43.3in |
| Blade Height - Intermediate | 40.5in |
| Blade Height - Lgp | 40.5in |
| Blade Capacity - Xl | 2.9yd3 |
| Blade Capacity - Intermediate | 2.8yd3 |
| Blade Capacity - Lgp | 3.1yd3 |
| Digging Depth - Xl | 24.8in |
| Digging Depth - Intermediate | 22.9in |
| Digging Depth - Lgp | 22.9in |
| Width | 8.9ft in |
| Height | 43.4in |
| Capacity | 2.9yd3 |
| Blade Angle (Both Directions) | 25degrees |
| Cutting Depth | 24.9in |
| Cooling System | 4.3gal |
| Fuel Tank | 48.6gal |
| Final Drive - Each - Lgp | 5.7gal |
| Final Drive - Each - Xl | 3.9gal |
| Crankcase - With Filter | 3.4gal |
| Transmission - Hydraulic Tank | 12gal |
| Rops | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| Fops | SAE J231-JAN81, ISO 3449-92 |
| Pump Output | 16.1 gal/min |
| Relief Valve Setting | 2900 psi |
| Winch Drive | Hydrostatic |
| Control | Pilot hydraulic |
| Overall Width | 29.2in |
| Drum Diameter | 10in |
| Drum Width | 10.8in |
| Rope Diameter - Recommended | 0.7in |
| Weight | 1345lb |
| Rope Diameter - Optional | 0.8in |
| Speed | Variable |
| Winch Length | 27.8in |
| Throat Clearance | 6.8in |
| Drum Capacity - Optional Cable | 257ft in |
| Maximum Line Pull - Bare Drum | 40000lb |
| Maximum Line Pull - Full Drum | 25000lb |
| Maximum Line Speed - Bare Drum | 132 ft/min |
| Maximum Line Speed - Full Drum | 207 ft/min |
