| Length W/ Blade | 170ft in |
|---|---|
| Width Over Tracks | 94.9ft in |
| Height To Top Of Cab | 109ft in |
| Length Of Track On Ground | 128.5ft in |
| Length W/O Blade | 128.5ft in |
| Ground Pressure - Lgp | 4.5 psi |
| Ground Pressure - Xl | 5.6 psi |
| Length - Track On Ground - Lgp | 91in |
| Length - Track On Ground - Xl | 91in |
| Shoe Width - Lgp | 26in |
| Shoe Width - Lgp Option 2 | 30in |
| Shoe Width - Xl | 20in |
| Track Gauge - Lgp | 69in |
| Track Gauge - Xl | 63in |
| Ground Contact Area - Lgp | 4726in2 |
| Ground Contact Area - Xl | 3652in2 |
| Ground Pressure | 2988psi |
| Ripper Type | Parallelogram |
| Number Of Shanks | 3 |
| Maximum Digging Depth | 13.3in |
| Maximum Reach - Ground Line | 21.9in |
| Height | 6.5in |
| Engine Make | 2236 |
| Gross Power | 104hp |
| Net Power | 104hp |
| Power Measured @ | 2200rpm |
| Displacement | 269cu in |
| Bore | 4.2in |
| Stroke | 5in |
| Engine Model | Cat C4.4 Acert |
| Eec 80/1269 | 104hp |
| Sae J1349 | 104hp |
| Iso 9249 | 104hp |
| Power - Net | 104hp |
| Operating Weight | 20313lb |
| Fuel Capacity | 51.5gal |
| Engine Oil Capacity | 4.9gal |
| Hydraulic Fluid Capacity | 15.7gal |
| Powertrain Fluid Capacity | 3gal |
| Final Drives Fluid Capacity | 2.6gal |
| Transmission Type | 2 |
| Max Speed - Forward | 5.6mph |
| Max Speed - Reverse | 6.2mph |
| Drive Pumps | 2 |
| Track Motors | 2 |
| Relief Valve Settings | 6918 psi |
| Operating Weight - Lgp | 21266lb |
| Operating Weight - Xl | 20534lb |
| Blade Width - Xl | 109.5in |
| Blade Width - Intermediate | 115in |
| Blade Width - Lgp | 126.7in |
| Blade Height - Xl | 42.2in |
| Blade Height - Intermediate | 39.8in |
| Blade Height - Lgp | 39.8in |
| Blade Capacity - Xl | 2.9yd3 |
| Blade Capacity - Intermediate | 2.8yd3 |
| Blade Capacity - Lgp | 3.1yd3 |
| Digging Depth - Xl | 23.1in |
| Digging Depth - Intermediate | 22.5in |
| Digging Depth - Lgp | 22.5in |
| Width | 109.5ft in |
| Blade Angle (Both Directions) | 75degrees |
| Cooling System | 6gal |
| Fuel Tank | 51.5gal |
| Final Drive - Each - Lgp | 2.6gal |
| Final Drive - Each - Xl | 2.6gal |
| Crankcase - With Filter | 3gal |
| Transmission - Hydraulic Tank | 15.7gal |
| Rops | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| Fops | SAE J231-JAN81, ISO 3449-92 |
| Pump Output | 19.4 gal/min |
| Relief Valve Setting | 2988 psi |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Overall Width | 29.2in |
| Drum Diameter | 10in |
| Drum Width | 10.8in |
| Rope Diameter - Recommended | 0.7in |
| Weight | 1345lb |
| Rope Diameter - Optional | 0.8in |
| Speed | Variable |
| Winch Length | 27.8in |
| Throat Clearance | 6.8in |
| Maximum Line Pull - Bare Drum | 40000lb |
| Maximum Line Pull - Full Drum | 25000lb |
