| Width - Lgp Vpat | 13.42ft in |
|---|---|
| Width - Lgp Vpat - Foldable | 13.42ft in |
| Capacity - Lgp Vpat - Foldable | 5.1yd3 |
| Capacity - Xl Su | 5.6yd3 |
| Capacity - Xl Vpat | 4.3yd3 |
| Width - Xl Vpat | 10.75ft in |
| Width - Xl Su | 10.33ft in |
| Capacity - Lgp Vpat | 5.1yd3 |
| Width Over Tracks | 8.18ft in |
| Height To Top Of Cab | 10.12ft in |
| Length Of Track On Ground | 8.37ft in |
| Ground Clearance | 1.4ft in |
| Track Gauge | 6.21ft in |
| Number Of Shoes Per Side | 40 |
| Shoe Width - Lgp | 33.1in |
| Shoe Width - Xl | 24in |
| Shoe Width - Xl - Fine Grading | 24in |
| Shoes/Side - Lgp | 46 |
| Shoes/Side - Xl | 40 |
| Shoes/Side - Xl - Fine Grading | 46 |
| Track Gauge - Lgp | 85in |
| Track Gauge - Xl | 74.41in |
| Track Gauge - Xl - Fine Grading | 74.41in |
| Track On Ground - Lgp | 122.4in |
| Track On Ground - Xl | 102.6in |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 7 |
| Ground Contact Area | 4822in2 |
| Ground Contact Area - Lgp | 8928in2 |
| Ground Contact Area - Xl | 5518in2 |
| Ground Pressure | 7.24psi |
| Ground Pressure - Lgp | 4.5 psi |
| Ground Pressure - Xl | 6.7 psi |
| Grouser Height - Lgp | 2.21in |
| Grouser Height - Xl | 2.6in |
| Beam Cross Section | 216 mm 254 mm (8.5 in 10.0 in) |
| Number Of Pockets | 3 |
| Maximum Penetration - Xl | 20.2in |
| Maximum Penetration - Lgp | 15.6in |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3.3ft in |
| Shank Gauge | 6.6ft in |
| Shank Section | 73 mm 176 mm (2.9 in 6.9 in) |
| Maximum Pry-Out Force - Xl | 47480lb ft |
| Maximum Pry-Out Force - Lgp | 38217lb ft |
| Each Additional Shank | 172lb |
| Weight - With Three Shanks | 3444lb |
| Overall Beam Width | 86.7in |
| Engine Make | 2236 |
| Net Power | 145hp |
| Displacement | 433cu in |
| Bore | 4.1in |
| Stroke | 5.3in |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final |
| Engine Model | Cat? C7.1 ACERT? |
| Flywheel Power | 166hp |
| Note (3) | All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) s |
| Note (4) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Fuel Capacity | 79gal |
| Cooling System Fluid Capacity | 10.8gal |
| Hydraulic Fluid Capacity | 7.8gal |
| Final Drives Fluid Capacity | 1.9gal |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 6.3mph |
| Max Speed - Reverse | 7.4mph |
| 1.0 Forward | 2.1mph |
| 2.0 Forward | 3.6mph |
| 3.0 Forward | 6.1mph |
| 1.0 Reverse | 2.5mph |
| 2.0 Reverse | 4.4mph |
| 3.0 Reverse | 7.6mph |
| 1.5 Forward | 2.7mph |
| 2.5 Forward | 4.7mph |
| 1.5 Reverse | 3.4mph |
| 2.5 Reverse | 5.9mph |
| 0.5 Forward | 1.6mph |
| 0.7 Forward | 1.7mph |
| 1.7 Forward | 3mph |
| 2.7 Forward | 5.2mph |
| 0.5 Reverse | 1.9mph |
| 0.7 Reverse | 2.1mph |
| 1.7 Reverse | 3.7mph |
| 2.7 Reverse | 6.5mph |
| 0.5 Forward (Eu) | 1.5mph |
| 0.7 Forward (Eu) | 1.6mph |
| 0.5 Reverse (Eu) | 1.8mph |
| 0.7 Reverse (Eu) | 1.9mph |
| 1.0 Reverse (Eu) | 2.2mph |
| 1.0 Forward (Eu) | 1.9mph |
| Operating Weight | 36943lb |
| Operating Weight - Lgp | 40446lb |
| Shipping Weight - Lgp | 39339lb |
| Shipping Weight - Xl | 36153lb |
| Operating Weight - Xl | 36943lb |
| Xl Vpat Blade | 2341lb |
| Lgp Vpat - Blade | 2720lb |
| Xl Vpat Foldable | 2762lb |
| Lgp Vpat - Foldable | 3287lb |
| Xl Su - Blade | 5732lb |
| Xl Vpat Landfill | 2912lb |
| Lgp Vpat - Landfill | 3166lb |
| Width | 10.8ft in |
| Height | 47.1in |
| Capacity | 4.2yd3 |
| Cutting Depth | 21.2in |
| Cooling System | 10.6gal |
| Fuel Tank | 73.2gal |
| Def Tank* | 5gal |
| Final Drive - Each | 1.8gal |
| Hydraulic Tank | 7.8gal |
| Engine Crankcase | 4.5gal |
| Power Train | 42.3gal |
| Roller Frames Xl/Lgp - Each | 20/17.5 L (4.3/4.6 gal) |
| Brakes | Brakes meet the standard ISO 10265:2008. |
| Rops | ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. |
| Fops | FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equi |
| Lift Cylinder Flow | 33.5 gal/min |
| Ripper Cylinder Flow | 33.5 gal/min |
| Pump Output - Steering | 36.2 gal/min |
| Pump Output - Implement | 33.5 gal/min |
| Tilt Cylinder Flow | 23.8 gal/min |
| Angle Cylinder Flow - Vpat | 33.5 gal/min |
| Sound Level Information (1) | The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when ANSI/SAE J1166 FEB2008 is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum eng |
| Sound Level Information (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operat |
| Sound Level Information (3) | The average exterior sound pressure level is 85.5 dB(A) when the SAE J88 FEB2006 Constant Speed Moving Test procedure is used to measure the value for the standard machine. The measurement was conduc |
| Specification Name Too Long | If equipped, the certification label 110 dB(A) is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label |
| Note | *Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details. |
| Flange Diameter | 19.8in |
| Oil Capacity | 19.6gal |
| Winch Model | PA55 |
| Winch And Bracket Length | 45.1in |
| Drum Capacity - 22 Mm (0.88 In) | 288.8ft in |
| Winch Drive | Mechanical |
| Control | Electric |
| Overall Width | 38.4in |
| Drum Diameter | 10in |
| Drum Width | 12.4in |
| Rope Diameter - Recommended | 0.9in |
| Maximum Bare Drum - Line Pull | 69200lb |
| Maximum Full Drum - Line Pull | 44410lb |
| Winch Case - Width | 38.4in |
| Weight | 2814lb |
| Note (1) | *Weight: Includes pump, operator controls, oil, mounting brackets and spacers. |
| Note (2) | Slow and standard speed winches are available. |
