| Blade Type | N/A |
|---|---|
| Length - Track On Ground | 113.1in |
| Ground Pressure | 9.36psi |
| Grouser Height | 2.6in |
| Beam Cross Section | 216 254 mm 8.5 10 in |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Overall Beam Width | 87in |
| Weight - Each Additional Shank | 163lb |
| Maximum Penetration | 19.7in |
| Pry-Out Force | 20137lb |
| Weight - With One Shank | 3606lb |
| Maximum Penetration Force | 14557lb |
| Flywheel Power | 200hp |
| Operating Weight | 44418lb |
| 2.0 Forward | 3.2mph |
| 3.0 Forward | 5.3mph |
| 2.0 Reverse | 4.1mph |
| 3.0 Reverse | 6.8mph |
| 1.5 Forward | 2.4mph |
| 2.5 Forward | 4.1mph |
| 1.5 Reverse | 3mph |
| 2.5 Reverse | 5.3mph |
| 3.5 Forward | 7.2mph |
| 3.5 Reverse | 9.1mph |
| Shipping Weight | 36974lb |
| Operating Weight - Xl A | 44795lb |
| Shipping Weight - Xl A | 37589lb |
| Operating Weight - Xl Su | 45082lb |
| Shipping Weight - Xl Su | 37589lb |
| Operating Weight - Xw A | 47576lb |
| Shipping Weight - Xw A | 39174lb |
| Operating Weight - Xw Su | 46961lb |
| Shipping Weight - Xw Su | 39174lb |
| Operating Weight - Xw Vpat | 52031lb |
| Shipping Weight - Xw Vpat | 39591lb |
| Operating Weight - Lgp S | 48588lb |
| Shipping Weight - Lgp S | 41471lb |
| Operating Weight - Lgp Vpat | 53178lb |
| Shipping Weight - Lgp Vpat | 40783lb |
| Shipping Weight - Lgp A | 41471lb |
| Operating Weight - Lgp A | 50869lb |
| Shipping Weight - Std A | 35860lb |
| Shipping Weight - Std Su | 42834lb |
| Operating Weight - Xl Vpat | 51041lb |
| Shipping Weight - Xl Vpat | 38865lb |
| Cooling System | 20.3gal |
| Fuel Tank | 112gal |
| Final Drive - Each | 3.6gal |
| Hydraulic Tank | 13.6gal |
| Engine Crankcase | 7.4gal |
| Power Train | 38.5gal |
| Pivot Shaft Compartment | 1.3gal |
| Roller Frames - Each | 6.5gal |
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
| Rops/Fops | ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II |
| Cab | Meets appropriate standards as listed below. |
| Pressure Setting - Steering | 6048 psi |
| Lift Cylinder Flow | 49.9 gal/min |
| Ripper Cylinder Flow | 49.9 gal/min |
| Pump Output - Steering | 47.3 gal/min |
| Pump Output - Implement | 49.9 gal/min |
| Tilt Cylinder Flow | 21.1 gal/min |
| Angle Cylinder Flow - Vpat | 44.9 gal/min |
| Flange Diameter | 19.8in |
| Oil Capacity | 17.8gal |
| Winch And Bracket Length | 47.6in |
| Drum Capacity - 22 Mm (0.88 In) | 290ft in |
| Drum Diameter | 10in |
| Drum Width | 13in |
| Winch Case - Width | 38.4in |
| Increased Tractor Length - Std | 20.4in |
| Maximum Bare Drum - Line Pull | 89800lb |
| Increased Tractor Length - Lgp | 15.6in |
| Drum Capacity - 29 Mm (1.13 In) | 220ft in |
| Ferrule Size (O.D. Length) | 54 67 mm 2.10 2.63 in |
| Drum Capacity - 25 Mm (1.0 In) | 220ft in |
| Weight | 2600lb |
| Rated Bare Drum Line Pull (2) | 59100lb |
| Rated Bare Drum Line Pull (1) | 70000lb |
| Winch Model (1) | PA56 Optional Gearing |
| Optional Rope (25mm/1.0 In) | 163ft in |
| Oil Refill Capacity | 17.8gal |
| Winch Case - Length | 47.6in |
| Winch Model (2) | PA56 |
| Gross Power - Sae J1995 | 228hp |
| Net Power - 80/1269/Eec | 200hp |
| Engine Model | Cat C9 ACERT |
| Engine Emissions | U.S. EPA Tier 3/EUStage IIIA/MLITStep 3 |
| Gross Power | 228hp |
| Net Power - Caterpillar | 200hp |
| Net Power - Iso 9249 | 200hp |
| Net Power - Eu 80/1269 | 200hp |
| Net Power - Sae J1349 | 198hp |
| Bore | 4.4in |
| Stroke | 5.9in |
| Displacement | 537cu in |
| Net Power - Din 70020 | 207 PS |
| Gross Power - Iso 14396 | 220hp |
| Bulldozer - Angle | 3126 psi |
| Ripper | 2799 psi |
| Bulldozer - Lift | 3126 psi |
| Bulldozer - Tilt | 3126 psi |
