| Ground Clearance | 43.4in |
|---|---|
| Height | 4.2ft in |
| Capacity | 6.57yd3 |
| Digging Depth | 29.3in |
| Width | 13.7ft in |
| Maximum Tilt | 17.4in |
| Beam Cross Section | 219 mm 304 mm (8.8 in 12 in) |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3.3ft in |
| Shank Gauge | 6.6ft in |
| Shank Section | 74 mm 175 mm (2.9 in 6.9 in) |
| Overall Beam Width | 87in |
| Weight - Each Additional Shank | 161lb |
| Maximum Penetration | 18in |
| Pry-Out Force | 26190lb |
| Weight - With One Shank | 3302lb |
| Maximum Penetration Force | 14747lb |
| Ramp Angle | 26 degrees |
| Displacement | 567cu in |
| Bore | 4.5in |
| Stroke | 5.9in |
| Emissions | U.S. EPA Tier 4 Final |
| Engine Model | Cat C9.3 ACERT |
| Flywheel Power | 207hp |
| Drive Train Type | Mechanical |
| Operating Weight | 46263lb |
| 1.0 Forward | 2.3mph |
| 2.0 Forward | 4.1mph |
| 3.0 Forward | 7mph |
| 1.0 Reverse | 3mph |
| 2.0 Reverse | 5.2mph |
| 3.0 Reverse | 9mph |
| 1.5 Forward | 3mph |
| 2.5 Forward | 5.1mph |
| 1.5 Reverse | 3.8mph |
| 2.5 Reverse | 6.5mph |
| 0.5 Forward | 1.7mph |
| 0.7 Forward | 2.1mph |
| 1.7 Forward | 3.6mph |
| 2.7 Forward | 6.2mph |
| 0.5 Reverse | 2.2mph |
| 0.7 Reverse | 2.6mph |
| 1.7 Reverse | 4.6mph |
| 2.7 Reverse | 7.9mph |
| Operating Weight - Xl A | 46791lb |
| Operating Weight - Xl Su | 46263lb |
| Operating Weight - Xw A | 48922lb |
| Operating Weight - Xw Su | 48034lb |
| Operating Weight - Xw Vpat | 53170lb |
| Shipping Weight - Xw Vpat | 45840lb |
| Operating Weight - Lgp S | 50490lb |
| Operating Weight - Lgp Vpat | 53651lb |
| Shipping Weight - Lgp Vpat | 48521lb |
| Operating Weight - Lgp A | 52954lb |
| Operating Weight - Xl Vpat | 52167lb |
| Shipping Weight - Xl Vpat | 47165lb |
| Shipping Weight - Xl A/Su | 39138lb |
| Shipping Weight - Xw A/Su | 40596lb |
| Shipping Weight - Lgp S/A | 43664lb |
| Cooling System | 13.4gal |
| Fuel Tank | 108.7gal |
| Def Tank* | 4.5gal |
| Final Drive - Each | 3.6gal |
| Hydraulic Tank | 17.3gal |
| Engine Crankcase | 6.5gal |
| Power Train | 39.1gal |
| Pivot Shaft Compartment | 1.3gal |
| Roller Frames - Each | 6.6gal |
| Brakes | Brakes meet the International Standard ISO 10265:2008. |
| Rops/Fops | ROPS meets ISO 3471:2008, FOPS meets ISO 3449:2005 Level II |
| Cab | Meets appropriate standards |
| Lift Cylinder Flow | 54 gal/min |
| Ripper Cylinder Flow | 54 gal/min |
| Pump Output - Steering | 52 gal/min |
| Pump Output - Implement | 54 gal/min |
| Tilt Cylinder Flow | 29 gal/min |
| Angle Cylinder Flow - Vpat | 50 gal/min |
| Pump Output - Fan | 25 gal/min |
| Steering | 5800 psi |
| Relief Pressures - Non-Vpat | 3150 psi |
| Relief Pressures - Vpat | 3540 psi |
| Oil Capacity | 17.8gal |
| Winch Model | PA56 |
| Drum Capacity - 22 Mm (0.88 In) | 288.7ft in |
| Winch Drive | Mechanical |
| Control | Mechanical |
| Drum Diameter | 10in |
| Rope Diameter - Recommended | 0.9in |
| Cable Ferrule Size - O.D. Length | 54 mm 67 mm (2.1 in 2.6 in) |
| Maximum Bare Drum - Line Speed | 130 ft/min |
| Maximum Full Drum - Line Speed | 224 ft/min |
| Maximum Bare Drum - Line Pull | 89800lb |
| Maximum Full Drum - Line Pull | 76300lb |
| Increased Tractor Length - Lgp | 14.4in |
| Drum Capacity - 25 Mm (1.0 In) | 219.8ft in |
| Weight | 2652lb |
| Rope Diameter - Optional | 1in |
