| Overall Length | 32.55ft in |
|---|---|
| Overall Width | 9.44ft in |
| Overall Height | 11.29ft in |
| Wheelbase | 15.32ft in |
| Ground Clearance | 1.63ft in |
| Dump Height | 21.33ft in |
| Dump Ground Clearance | 1.83ft in |
| Capacity - Heaped | 22.11yd3 |
| Capacity - Struck | 17.14yd3 |
| Rated Payload | 61949.9lb |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Gross Power | 329hp |
| Net Power | 325hp |
| Aspiration | Turbochaarged |
| Displacement | 762.8cu in |
| Bore | 5.1in |
| Stroke | 6.2in |
| Emissions | The 730 meets Tier 4 Final/Stage IV emission standards. |
| Net Power - Iso 9249 | 321hp |
| Net Power - Sae J1349 | 367hp |
| Gross Power - Sae J1995 | 375hp |
| Engine Model | Cat C13 ACERT |
| Net Power - Iso 14396 | 370hp |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
| Net Power - Eec 80/1269 | 321hp |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, i |
| Peak Engine Torque Speed | 1200rpm |
| No Engine De-Rating Below | 12500ft in |
| Fuel Capacity | 95.2gal |
| Cooling System Fluid Capacity | 22.5gal |
| Engine Oil Capacity | 9.8gal |
| Transmission Fluid Capacity | 9.6gal |
| Tire Size | 23.5R25 |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 1 |
| Max Speed | 34.4mph |
| Forward - 1 | 5mph |
| Forward - 2 | 9mph |
| Forward - 3 | 14mph |
| Forward - 4 | 21mph |
| Forward - 5 | 29mph |
| Forward - 6 | 34mph |
| Reverse - 1 | 6mph |
| Lock To Lock | 4.75 seconds @ 60 rpm |
| Cooling System | 21.9gal |
| Fuel Tank | 108.8gal |
| Def Tank* | 5.3gal |
| Engine Crankcase | 10gal |
| Transmission | 12.4gal |
| Hydraulic System | 29.1gal |
| Final Drives/Differential | 33gal |
| Output Transfer Gear Box | 6.3gal |
| Cab - Fops | ISO 3449 Level II 2005 |
| Cab - Rops | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
| Front Axle - Empty | 33069lb |
| Center Axle - Empty | 10053lb |
| Rear Axle - Empty | 9568lb |
| Total Empty | 52690lb |
| Front Axle - Rated Load | 7231lb |
| Center Axle - Rated Load | 27249lb |
| Rear Axle - Rated Load | 27249lb |
| Total - Rated Load | 61729lb |
| Front Axle - Loaded | 40300lb |
| Center Axle - Loaded | 37302lb |
| Rear Axle - Loaded | 36817lb |
| Total Loaded | 114420lb |
| Interior Cab | 72 dB(A) |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, wh |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Heaped (Sae 2:1) | 23yd3 |
| Struck | 17.4yd3 |
| Tailgate Struck | 18.2yd3 |
| Tailgate Heaped Sae 2:1 | 24.6yd3 |
| Raise Time | 12 s |
| Lower Time | 8 s |
| Front | 0.4in |
| Scow | 0.6in |
| Side | 0.5in |
| Base | 0.6in |
| Front Plate | 0.3in |
| Base Plate | 0.6in |
| Side Plates | 0.5in |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Note | An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators, and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having |
| Wheel Loader: 962m - Passes | 45 |
| Wheel Loader: 950m - Passes | 5 |
