| Dump Angle | 45degrees |
|---|---|
| Rated Payload | 62000lb |
| Capacity - Heaped | 23yd3 |
| Capacity - Struck | 17.4yd3 |
| Engine Make | 2236 |
| Gross Power | 375hp |
| Net Power | 367hp |
| Max Torque | 1579lb ft |
| Torque Measured @ | 1200rpm |
| Displacement | 763cu in |
| Bore | 5.2in |
| Stroke | 6.2in |
| Net Power - Sae J1349 | 367hp |
| Gross Power - Sae J1995 | 375hp |
| Engine Model | Cat C13 |
| Net Power - Iso 14396 | 370hp |
| Peak Engine Torque Speed | 1200rpm |
| Fuel Capacity | 108.8gal |
| Cooling System Fluid Capacity | 21.9gal |
| Transmission Fluid Capacity | 9.2gal |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 1 |
| Forward - 1 | 5mph |
| Forward - 2 | 9mph |
| Forward - 3 | 14mph |
| Forward - 4 | 21mph |
| Forward - 5 | 29mph |
| Forward - 6 | 34mph |
| Reverse - 1 | 6mph |
| Lock To Lock | 4.75 seconds @ 60 rpm |
| Cooling System | 21.9gal |
| Fuel Tank | 108.8gal |
| Engine Crankcase | 10.5gal |
| Transmission | 9.2gal |
| Hydraulic System | 29.1gal |
| Final Drives/Differential | 35.7gal |
| Output Transfer Gear Box | 6.3gal |
| Def Tank (Iso 2224-1) | 5.3gal |
| Cab - Fops | ISO 3449 Level II 2005 |
| Cab - Rops | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
| Front Axle - Empty | 33091lb |
| Center Axle - Empty | 10384lb |
| Rear Axle - Empty | 9656lb |
| Total Empty | 53131lb |
| Front Axle - Rated Load | 7231lb |
| Center Axle - Rated Load | 27249lb |
| Rear Axle - Rated Load | 27249lb |
| Total - Rated Load | 61729lb |
| Front Axle - Loaded | 40322lb |
| Center Axle - Loaded | 37633lb |
| Rear Axle - Loaded | 36905lb |
| Total Loaded | 114860lb |
| Interior Cab | 76 dB(A) |
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Heaped (Sae 2:1) | 23yd3 |
| Struck | 17.4yd3 |
| Tailgate Struck | 18.2yd3 |
| Tailgate Heaped Sae 2:1 | 24.6yd3 |
| Raise Time | 12 s |
| Lower Time | 8 s |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
