| Overall Length | 35.73ft in |
|---|---|
| Overall Width | 11.01ft in |
| Overall Height | 12.15ft in |
| Wheelbase | 17.15ft in |
| Ground Clearance | 1.76ft in |
| Dump Height | 22.82ft in |
| Dump Ground Clearance | 2.09ft in |
| Dump Clearance | 2ft in |
| Capacity - Heaped | 25.77yd3 |
| Capacity - Struck | 19.23yd3 |
| Rated Payload | 72091.16lb |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Gross Power | 413hp |
| Net Power | 394hp |
| Max Torque | 1524.6lb ft |
| Torque Measured @ | 1200rpm |
| Aspiration | turbocharged |
| Displacement | 926cu in |
| Bore | 5.4in |
| Stroke | 6.8in |
| Emissions | The 735 meets Tier 4 Final/Stage IV emission standards. |
| Net Power - Iso 9249 | 424hp |
| Net Power - Sae J1349 | 419hp |
| Gross Power - Sae J1995 | 435hp |
| Engine Model | Cat C15 ACERT |
| Flywheel Power | 385hp |
| Net Power - Iso 14396 | 429hp |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
| Net Power - Eec 80/1269 | 424hp |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, i |
| Peak Engine Torque Speed | 1200rpm |
| No Engine De-Rating Below | 12500ft in |
| Fuel Capacity | 148gal |
| Cooling System Fluid Capacity | 21.2gal |
| Engine Oil Capacity | 10.1gal |
| Transmission Fluid Capacity | 19.1gal |
| Tire Size | 26.5R25 |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 1 |
| Max Speed | 36.3mph |
| Forward - 1 | 5.2mph |
| Forward - 2 | 7.1mph |
| Forward - 3 | 9.6mph |
| Forward - 4 | 12.9mph |
| Forward - 5 | 17.5mph |
| Forward - 6 | 23.5mph |
| Forward - 7 | 31.9mph |
| Reverse - 1 | 5mph |
| Reverse - 2 | 6.8mph |
| Lock To Lock | 4.75 seconds @ 60 rpm |
| Cooling System | 25.1gal |
| Fuel Tank | 148gal |
| Def Tank* | 5.3gal |
| Engine Crankcase | 10.6gal |
| Transmission | 22.5gal |
| Hydraulic System | 86.6gal |
| Final Drives/Differential | 21.1gal |
| Output Transfer Gear Box | 6.3gal |
| Cab - Fops | SAE J231 JAN81 and ISO 3449-1992 Level II |
| Cab - Rops | SAE J1040 May 1994 and ISO 3471-1994 |
| Brakes | SAE J/ISO 3450-1998 |
| Steering | ISO 5010 1992E |
| Front Axle - Empty | 41881lb |
| Center Axle - Empty | 14406lb |
| Rear Axle - Empty | 12919lb |
| Total Empty | 69206lb |
| Front Axle - Rated Load | 7417lb |
| Center Axle - Rated Load | 32337lb |
| Rear Axle - Rated Load | 32337lb |
| Total - Rated Load | 72091lb |
| Front Axle - Loaded | 49298lb |
| Center Axle - Loaded | 46743lb |
| Rear Axle - Loaded | 45256lb |
| Total Loaded | 141297lb |
| Interior Cab | 79 dB(A) |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, wh |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Heaped (Sae 2:1) | 25.8yd3 |
| Struck | 19yd3 |
| Tailgate Struck | 19.9yd3 |
| Tailgate Heaped Sae 2:1 | 27.3yd3 |
| Heaped Sae 1:1 | 32yd3 |
| Raise Time | 11 s |
| Lower Time | 7 s |
| Front | 0.4in |
| Scow | 0.6in |
| Side | 0.5in |
| Base | 0.6in |
| Front Plate | 0.3in |
| Base Plate | 0.6in |
| Side Plates | 0.5in |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Note | An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators, and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having |
| Wheel Loader: 962m - Passes | 45 |
| Wheel Loader: 950m - Passes | 5 |
