| Rated Payload | 90400lb |
|---|---|
| Capacity - Heaped | 32.71yd3 |
| Capacity - Struck | 24.2yd3 |
| Engine Make | 2236 |
| Gross Power | 511hp |
| Net Power | 496hp |
| Torque Measured @ | 1200rpm |
| Displacement | 1106cu in |
| Bore | 5.7in |
| Stroke | 7.2in |
| Net Power - Sae J1349 | 496hp |
| Gross Power - Sae J1995 | 511hp |
| Engine Model | Cat C18 ACERT |
| Net Power - Iso 14396 | 504hp |
| Peak Engine Torque Speed | 1200rpm |
| Fuel Capacity | 145.3gal |
| Cooling System Fluid Capacity | 23.7gal |
| Transmission Fluid Capacity | 19.8gal |
| Number Of Forward Gears | 9 |
| Number Of Reverse Gears | 2 |
| Forward - 1 | 3.8mph |
| Forward - 2 | 5mph |
| Forward - 3 | 7mph |
| Forward - 4 | 8.8mph |
| Forward - 5 | 11.6mph |
| Forward - 6 | 14.2mph |
| Forward - 7 | 19.6mph |
| Reverse - 1 | 4mph |
| Reverse - 2 | 9.1mph |
| Lock To Lock | 4.8 seconds @ 60 rpm |
| Forward - 8 | 23.5mph |
| Forward - 9 | 34mph |
| Cooling System | 23.7gal |
| Fuel Tank | 145.3gal |
| Def Tank* | 6.6gal |
| Final Drive - Each | 1.3gal |
| Engine Crankcase | 13.7gal |
| Brake Cooling Tank | 17.7gal |
| Transmission - Otg | 19.8gal |
| Axles - Each | 15.8gal |
| Cab - Fops | ISO 3449 Level II 2005 |
| Cab - Rops | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
| Front Axle - Empty | 43585lb |
| Center Axle - Empty | 15300lb |
| Rear Axle - Empty | 14749lb |
| Total Empty | 73634lb |
| Front Axle - Rated Load | 13007lb |
| Center Axle - Rated Load | 38691lb |
| Rear Axle - Rated Load | 38691lb |
| Total - Rated Load | 90389lb |
| Front Axle - Loaded | 56593lb |
| Center Axle - Loaded | 53991lb |
| Rear Axle - Loaded | 53440lb |
| Total Loaded | 164024lb |
| Interior Cab | 79 dB(A) |
| Note | Dimensions are for machines equipped with 29.5R25 tires. |
| Heaped (Sae 2:1) | 32.7yd3 |
| Struck | 24.2yd3 |
| Tailgate Struck | 25.5yd3 |
| Tailgate Heaped Sae 2:1 | 34.7yd3 |
| Raise Time | 12 s |
| Lower Time | 8 s |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
