| Overall Length | 34.56ft in |
|---|---|
| Overall Width | 21.3ft in |
| Overall Height | 17ft in |
| Wheelbase | 14.96ft in |
| Ground Clearance | 2.93ft in |
| Dump Height | 33.92ft in |
| Dump Ground Clearance | 3.17ft in |
| Inside Body Depth - Maximum | 6.21ft in |
| Inside Body Length | 21.58ft in |
| Inside Body Width | 17.06ft in |
| Loading Height - Empty | 14.37ft in |
| Centerline Front Tire Width | 13.28ft in |
| Dump Clearance | 3.17ft in |
| Engine Guard Clearance | 2.83ft in |
| Front Canopy Height | 16.96ft in |
| Height - Top Of Rops | 15.46ft in |
| Overall Canopy Width | 19.84ft in |
| Overall Height - Body Raised | 33.87ft in |
| Overall Tire Width | 17.13ft in |
| Rear Axle Clearance | 2.88ft in |
| Rear Axle - Tail | 10.04ft in |
| Wheel Base | 14.96ft in |
| Operating Width | 21.3ft in |
| Outside Body Width | 18.12ft in |
| Overall Body Length | 32.25ft in |
| Dump Angle | 49.4degrees |
| Lower Time | 13sec |
| Raise Time | 15sec |
| Load Capacity - Struck | 54.8yd3 |
| Load Capacity - Heaped | 78.8yd3 |
| Rated Payload | 200000lb |
| Number Of Cylinders | 12 |
| Engine Make | 2236 |
| Net Power | 939hp |
| Gross Power | 1016hp |
| Max Torque | 3478lb ft |
| Aspiration | turbocharged |
| Displacement | 1959cu in |
| Peak Torque | 2478lb ft |
| Bore | 5.7in |
| Stroke | 6.4in |
| Net Power - Cat | 938.7hp |
| Net Power - Iso 9249 | 938.7hp |
| Net Power - Sae J1349 | 938.7hp |
| Net Power - 80/1269/Eec | 938.7hp |
| Gross Power - Sae J1995 | 1016hp |
| Engine Model | Cat C32 ACERT |
| Fuel Capacity | 300gal |
| Cooling System Fluid Capacity | 61gal |
| Engine Oil Capacity | 133gal |
| Tire Size | 27.00R49(E4) |
| Transmission Type | Seven-speed planetary power shift |
| Number Of Gears - Forward | 7 |
| Number Of Gears - Reverse | 1 |
| Max Speed | 40.1mph |
| Reverse | 7.5 mile/h |
| Forward - 1 | 6.5mph |
| Forward - 2 | 8.9mph |
| Forward - 3 | 12mph |
| Forward - 4 | 16.2mph |
| Forward - 5 | 22mph |
| Forward - 6 | 29.6mph |
| Forward - 7 | 40.1mph |
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Empty Weight | 163089.9lb |
| Loaded Weight | 360000lb |
| Standard Tires | 27.00R49 (E4) |
| Pump Flow - High Idle | 130 gal/min |
| Relief Valve Setting - Raise | 2750 psi |
| Body Raise Time - High Idle | 15 s |
| Body Power Down - High Idle | 12 s |
| Relief Valve Setting - Lower | 500 psi |
| Planetary Ratio | 7.00:1 |
| Differential Ratio | 2.74:1 |
| Total Reduction Ratio | 19.16:1 |
| Top Speed - Loaded | 40.1mph |
| Steer Angle | 305degrees |
| Turning Diameter - Front | 83ft in |
| Nominal Payload Capacity | 200000lb |
| Maximum Payload Capacity | 200000lb |
| Maximum Capacity Struck (Sae) | 54.8yd3 |
| Sae (2:1) Capacity | 78.8yd3 |
| Cooling System | 61gal |
| Differential - Final Drives | 70gal |
| Steering Tank | 8gal |
| Crankcase | 30gal |
| Brake/Hoist Hydraulic Tank | 50gal |
| Fuel Tank - Standard | 300gal |
| Transmission Tank | 12gal |
| Operating Weight - Empty | 163089.9lb |
| Operating Weight - Loaded | 360000lb |
| Chassis Weight | 107756lb |
| Body Weight - Msd | 36200lb |
| Struck | 54.8yd3 |
| Heaped (Sae 2:1) | 78.8yd3 |
| Rops Standards | .ISO 3471:1994 ISO 3449:1992 Level II |
| Sound Standards | .ANSI/J919 APR95 SAE J88 APR95 |
| Body | 36200lb |
| Chassis | 107756lb |
| Front Axle - Empty | 45 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Empty | 55 % |
| Rear Axle - Loaded | 67 % |
| Gross Weight - Empty | 142039lb |
| Standards | ISO 3450:1996 |
| Brake Surface - Rear | 15828in2 |
| Brake Surface - Front | 6235in2 |
