| Net Power | 3188hp |
|---|---|
| Displacement | 5187cu in |
| Bore | 6.9in |
| Stroke | 8.7in |
| Gross Power - Sae J1995 | 3400hp |
| Engine Model | Cat C175-16 |
| Steering Standards | SAE J1511 OCT90, ISO 5010:1992 |
| Standard Tires | Choices |
| Pump Flow - High Idle | 247 gal/min |
| Relief Valve Setting - Raise | 3553 psi |
| Body Raise Time - High Idle | 19 s |
| Body Lower Time - Float | 20 s |
| Body Power Down - High Idle | 17.5 s |
| Total Reduction Ratio | 35:1 |
| Top Speed - Loaded | 40mph |
| Steer Angle | 34degrees |
| Turning Diameter - Front | 112ft in |
| Nominal Payload Capacity | 690000lb |
| Steering Tank | 55.5gal |
| Fuel Tank | 950gal |
| Crankcase | 82gal |
| Brake/Hoist Hydraulic Tank | 134.2gal |
| Final Drive - Each | 90gal |
| Fuel Tank - Optional | 1900gal |
| Front Axle - Empty | 48 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Empty | 52 % |
| Rear Axle - Loaded | 67 % |
| Chassis Weight | 445524lb |
| Body Weight Range | 38 500-54 500 kg (84,900-120,000 lb) |
| Rops Standards | Standards |
| Sound Standards | Standards |
| Controls | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
| Wheel Motor | Rear axle mounted Cat AC induction |
| Cooling System | Variable speed, hydraulic cooling system |
| Generator/Alternator | Brushless, remote mounted, dual bearing |
| Dynamic Retarding Power | 6370hp |
| Heaped (Sae 2:1) | 181-252 m3 (237-330 yd3) |
| Struck | 121.5-211 m3 (159-276 yd3) |
