| Overall Length | 28ft in |
|---|---|
| Width Over Tires | 8.05ft in |
| Wheelbase | 20.41ft in |
| Rear Ground Clearance | 1.25ft in |
| Tandem Axle Wheelbase | 5.23ft in |
| Front Ground Clearance | 2.05ft in |
| Blade Base | 8.41ft in |
| Overall Height With Cab | 10.34ft in |
| Height To Top Of Isomount Cab | 10.96ft in |
| Bank Angle | 90 |
| Emissions Certification | Tier 3 |
| Number Of Cylinders | 6 |
| Engine Model | FPT F4HE9687C |
| Gross Power | 220hp |
| Power Measured @ | 2200rpm |
| Peak Torque | 169.7lb ft |
| Torque Measured @ | 1500rpm |
| Net Power Gears 7-8 | 205hp |
| Net Torque Gears 7-8 | 686lb ft |
| Displacement | 409cu in |
| Aspiration | Turbocharged with air to air cooler |
| Std Operation Weight - Total | 35993lb |
| Oil System Fluid Capacity | 18.5gal |
| Fuel Capacity | 90gal |
| Cooling System Fluid Capacity | 10.5gal |
| Transmission Fluid Capacity | 25gal |
| Circle Gearbox Fluid Capacity | 0.8gal |
| Tire Size | 17.5-25 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 90amps |
| Articulation Angle | 25degrees |
| Turning Radius | 23.8ft in |
| Transmission Type | powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 26.6mph |
| Max Speed - Reverse | 17.7mph |
| Speed Range | 8 |
| Wheel Lean | 20degrees |
| Oscillation - Total | 15.3degrees |
| Moldboard Width | 14ft in |
| Moldboard Height | 23.7in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28in |
| Side Shift Left | 21in |
| Side Shift Right | 27in |
| Blade Down Pressure | 20626lb |
| Pump Type | load sensing piston |
| Pump Flow | 49gal/min |
| Blade Lift Above Ground | 17.6in |
| Diameter | 69in |
| Rotation | 360degrees |
| Max Lift Above Ground | 17.5in |
