| Overall Length | 26.71ft in |
|---|---|
| Width Over Tires | 8.01ft in |
| Wheelbase | 19.26ft in |
| Tandem Axle Wheelbase | 4.96ft in |
| Front Ground Clearance | 2ft in |
| Height To Top Of Isomount Cab | 10.21ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 125hp |
| Engine Make | 2236 |
| Engine Model | 3116 DITA |
| Power Measured @ | 2000rpm |
| Torque Measured @ | 1400rpm |
| Max Power | 140hp |
| Net Power Gears 7-8 | 140hp |
| Displacement | 402.8cu in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 25040.2lb |
| Oil System Fluid Capacity | 6.1gal |
| Fuel Capacity | 89.9gal |
| Cooling System Fluid Capacity | 10.6gal |
| Circle Gearbox Fluid Capacity | 1.9gal |
| Tire Size | 13-24 10 PR (G-2) |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 35amps |
| Articulation Angle | 20degrees |
| Turning Radius | 23.7ft in |
| Transmission Type | direct drive, powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 26.5mph |
| Max Speed - Reverse | 21mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12.1ft in |
| Moldboard Height | 24.1in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 30.6in |
| Side Shift Left | 20.7in |
| Side Shift Right | 26in |
| Blade Pull At Max Weight | 23503.5lb |
| Blade Down Pressure | 20062.1lb |
| Pump Type | axial piston |
| Pump Flow | 39.1gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Shift Left | 24.7in |
| Shift Right | 24.8in |
| Max Reach Outside Tires - Left | 72.5in |
| Max Reach Outside Tires - Right | 75.3in |
| Max Lift Above Ground | 18in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
