| Overall Length | 28.94ft in |
|---|---|
| Width Over Tires | 8.24ft in |
| Wheelbase | 19.42ft in |
| Rear Ground Clearance | 1.15ft in |
| Tandem Axle Wheelbase | 4.96ft in |
| Blade Base | 8.24ft in |
| Height To Top Of Isomount Cab | 10.86ft in |
| Torque | 692.6lb ft |
| Number Of Cylinders | 6 |
| Engine Model | C7.1 ACERT |
| Net Power Gear 1-2 | 145hp |
| Power Measured @ | 2100rpm |
| Displacement | 427.8cu in |
| Bore | 4.2in |
| Stroke | 5.4in |
| Std Operation Weight - Total | 39892lb |
| Oil System Fluid Capacity | 8gal |
| Max Operation Weight - Total | 48987lb |
| Fuel Capacity | 99.9gal |
| Cooling System Fluid Capacity | 13gal |
| Circle Gearbox Fluid Capacity | 1.9gal |
| Tire Size | 17.5 R25 |
| Articulation Angle | 20degrees |
| Turning Radius | 24.3ft in |
| Transmission Type | direct drive, powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 28.4mph |
| Max Speed - Reverse | 22.5mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 1.9ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 24in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28.4in |
| Side Shift Left | 20.1in |
| Side Shift Right | 26in |
| Blade Pull At Max Weight | 29980.7lb |
| Blade Down Pressure | 27236lb |
| Pump Type | Variable piston |
| Pump Flow | 55.7gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Shift Left | 25.9in |
| Shift Right | 25.9in |
| Max Reach Outside Tires - Left | 68.6in |
| Max Reach Outside Tires - Right | 75in |
| Max Lift Above Ground | 16.9in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
