| Overall Length | 28.12ft in |
|---|---|
| Width Over Tires | 8ft in |
| Wheelbase | 19.97ft in |
| Rear Ground Clearance | 1.13ft in |
| Tandem Axle Wheelbase | 4.99ft in |
| Front Ground Clearance | 1.95ft in |
| Blade Base | 8.44ft in |
| Height To Top Of Isomount Cab | 10.17ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 165hp |
| Engine Make | 2236 |
| Engine Model | C-9 ETA VHP |
| Net Power Gear 1-2 | 145hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 165hp |
| Max Power | 165hp |
| Net Power Gears 7-8 | 165hp |
| Displacement | 537cu in |
| Std Operation Weight - Total | 31320lb |
| Max Operation Weight - Total | 45818lb |
| Oil System Fluid Capacity | 7.2gal |
| Fuel Capacity | 100gal |
| Cooling System Fluid Capacity | 11.6gal |
| Circle Gearbox Fluid Capacity | 1.8gal |
| Tire Size | 14.00-24-12PR |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 75amps |
| Articulation Angle | 50degrees |
| Turning Radius | 24.3ft in |
| Transmission Type | direct-drive power shift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 27.4mph |
| Max Speed - Reverse | 21.6mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 24in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28.9in |
| Side Shift Left | 20.6in |
| Side Shift Right | 26in |
| Blade Pull At Max Weight | 28867lb |
| Blade Down Pressure | 23807.8lb |
| Pump Type | Variable piston |
| Pump Flow | 51.9gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 60.2in |
| Rotation | 360degrees |
| Shift Left | 27.4in |
| Shift Right | 28.7in |
| Max Reach Outside Tires - Left | 73.6in |
| Max Reach Outside Tires - Right | 71.2in |
| Max Lift Above Ground | 18.9in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
