| Overall Length | 29.2ft in |
|---|---|
| Width Over Tires | 8.47ft in |
| Wheelbase | 20.1ft in |
| Rear Ground Clearance | 1.13ft in |
| Tandem Axle Wheelbase | 5ft in |
| Front Ground Clearance | 1.97ft in |
| Blade Base | 8.39ft in |
| Height To Top Of Isomount Cab | 10.79ft in |
| Engine Make | 2236 |
| Engine Model | C9.3 ACERT VHP |
| Power Measured @ | 2100rpm |
| Torque Measured @ | 2100rpm |
| Net Power Gears 7-8 | 243hp |
| Net Torque Gears 7-8 | 920lb ft |
| Displacement | 567.5cu in |
| Std Operation Weight - Total | 39911lb |
| Oil System Fluid Capacity | 8gal |
| Max Operation Weight - Total | 49787lb |
| Fuel Capacity | 109.9gal |
| Cooling System Fluid Capacity | 14.8gal |
| Transmission Fluid Capacity | 17.2gal |
| Circle Gearbox Fluid Capacity | 1.9gal |
| Articulation Angle | 20degrees |
| Turning Radius | 25.5ft in |
| Transmission Type | direct drive, powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 29mph |
| Max Speed - Reverse | 22.9mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 24in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28.2in |
| Side Shift Left | 20.1in |
| Side Shift Right | 26in |
| Blade Pull At Max Weight | 20044lb |
| Blade Down Pressure | 22884lb |
| Pump Type | Variable piston |
| Pump Flow | 55.7gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Shift Left | 27.4in |
| Shift Right | 28.7in |
| Max Reach Outside Tires - Left | 70.5in |
| Max Reach Outside Tires - Right | 77.9in |
| Max Lift Above Ground | 18.9in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
