| Overall Length | 28.25ft in |
|---|---|
| Width Over Tires | 8.24ft in |
| Wheelbase | 19.59ft in |
| Tandem Axle Wheelbase | 5.06ft in |
| Front Ground Clearance | 2.1ft in |
| Blade Base | 8.76ft in |
| Height To Top Of Isomount Cab | 10.24ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 6081H |
| Power Measured @ | 2000rpm |
| Torque Measured @ | 900rpm |
| Max Power | 155hp |
| Net Power Gears 7-8 | 155hp |
| Net Torque Gears 7-8 | 549lb ft |
| Displacement | 494cu in |
| Aspiration | Turbocharged with aftercooler |
| Std Operation Weight - Total | 31300lb |
| Oil System Fluid Capacity | 7.7gal |
| Max Operation Weight - Total | 36030lb |
| Fuel Capacity | 106gal |
| Cooling System Fluid Capacity | 12gal |
| Transmission Fluid Capacity | 10.1gal |
| Circle Gearbox Fluid Capacity | 1.1gal |
| Tire Size | 14.00 – 24 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 55amps |
| Articulation Angle | 25degrees |
| Turning Radius | 22ft in |
| Transmission Type | Power Shift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Max Speed - Forward | 25.8mph |
| Max Speed - Reverse | 25.8mph |
| Wheel Lean | 20degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 24in |
| Moldboard Thickness | 0.9in |
| Side Shift Left | 26.9in |
| Side Shift Right | 26.9in |
| Blade Pull At Max Weight | 27810lb |
| Pump Type | Closed Center Variable displacement |
| Pump Flow | 54.7gal/min |
| Relief Valve Pressure | 2550psi |
| Diameter | 59.9in |
| Rotation | 360degrees |
| Shift Left | 31in |
| Shift Right | 28.6in |
| Max Reach Outside Tires - Left | 85.1in |
| Max Reach Outside Tires - Right | 83.1in |
| Max Lift Above Ground | 18.6in |
| Blade Tip Angle - Front | 49degrees |
| Blade Tip Angle - Rear | 5degrees |
