| Overall Length | 27.96ft in |
|---|---|
| Width Over Tires | 8.25ft in |
| Wheelbase | 20.41ft in |
| Rear Ground Clearance | 1.25ft in |
| Tandem Axle Wheelbase | 5.23ft in |
| Blade Base | 8.41ft in |
| Height To Top Of Isomount Cab | 10.31ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2301 |
| Engine Model | Cummins 6A 5.9 |
| Power Measured @ | 2200rpm |
| Net Power Gear 5-6 | 140hp |
| Max Power | 140hp |
| Net Power Gears 7-8 | 140hp |
| Net Torque Gears 7-8 | 485lb ft |
| Displacement | 360.1cu in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 29775.7lb |
| Max Operation Weight - Total | 29775.7lb |
| Fuel Capacity | 90.1gal |
| Cooling System Fluid Capacity | 10.6gal |
| Transmission Fluid Capacity | 6.7gal |
| Circle Gearbox Fluid Capacity | 0.8gal |
| Tire Size | 14×24 12 ply G2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 70amps |
| Articulation Angle | 25degrees |
| Turning Radius | 23786.1ft in |
| Transmission Type | direct-drive power shift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 26.7mph |
| Max Speed - Reverse | 18.7mph |
| Wheel Lean | 25degrees |
| Oscillation - Total | 20degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 12.1ft in |
| Moldboard Height | 24.5in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 28in |
| Side Shift Left | 21in |
| Side Shift Right | 27.1in |
| Blade Down Pressure | 14627.7lb |
| Pump Type | full hydraulic, load sending, variable displacement piston |
| Pump Flow | 50.5gal/min |
| Relief Valve Pressure | 2600psi |
| Diameter | 69.1in |
| Rotation | 360degrees |
| Max Reach Outside Tires - Left | 77.9in |
| Max Reach Outside Tires - Right | 85.6in |
| Max Lift Above Ground | 17.6in |
| Blade Tip Angle - Front | 42degrees |
| Blade Tip Angle - Rear | 5degrees |
