| Overall Length | 29.92ft in |
|---|---|
| Width Over Tires | 8.34ft in |
| Wheelbase | 20ft in |
| Blade Base | 8.51ft in |
| Height To Top Of Isomount Cab | 10.17ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2244 |
| Engine Model | D7DGCE2 |
| Power Measured @ | 2200rpm |
| Torque Measured @ | 1400rpm |
| Max Power | 228hp |
| Net Power Gears 7-8 | 228hp |
| Net Torque Gears 7-8 | 774lb ft |
| Displacement | 436cu in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 35501.1lb |
| Fuel Capacity | 100gal |
| Cooling System Fluid Capacity | 7.4gal |
| Transmission Fluid Capacity | 10.1gal |
| Tire Size | 14.00 x 24 , G-2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 80amps |
| Articulation Angle | 22degrees |
| Transmission Type | powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 28.5mph |
| Max Speed - Reverse | 20.4mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 2.1ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 25in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 32in |
| Side Shift Left | 26.5in |
| Side Shift Right | 26.5in |
| Blade Pull At Max Weight | 22685lb |
| Blade Down Pressure | 17904lb |
| Pump Type | load sensing hydraulic |
| Pump Flow | 75.1gal/min |
| Relief Valve Pressure | 2700psi |
| Diameter | 66.3in |
| Rotation | 360degrees |
| Shift Left | 30.5in |
| Shift Right | 29.5in |
| Max Reach Outside Tires - Left | 79.5in |
| Max Reach Outside Tires - Right | 79in |
| Max Lift Above Ground | 17.5in |
| Blade Tip Angle - Front | 44degrees |
| Blade Tip Angle - Rear | 6.5degrees |
