| Overall Length | 30.59ft in |
|---|---|
| Width Over Tires | 9.17ft in |
| Wheelbase | 20.5ft in |
| Blade Base | 8.92ft in |
| Height To Top Of Isomount Cab | 10.5ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2244 |
| Engine Model | D10BGAE2 |
| Power Measured @ | 2100rpm |
| Torque Measured @ | 1100rpm |
| Max Power | 243hp |
| Net Power Gears 7-8 | 243hp |
| Net Torque Gears 7-8 | 846lb ft |
| Displacement | 586cu in |
| Aspiration | turbocharged |
| Std Operation Weight - Total | 43250.3lb |
| Fuel Capacity | 120gal |
| Cooling System Fluid Capacity | 8.2gal |
| Transmission Fluid Capacity | 10.1gal |
| Tire Size | 16.00 x 24, G-2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 80amps |
| Articulation Angle | 22degrees |
| Transmission Type | powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 23.8mph |
| Max Speed - Reverse | 17mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 2.3ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 31in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 33in |
| Side Shift Left | 26.5in |
| Side Shift Right | 26.5in |
| Blade Pull At Max Weight | 27248lb |
| Blade Down Pressure | 22963lb |
| Pump Type | load sensing hydraulic |
| Pump Flow | 75.1gal/min |
| Relief Valve Pressure | 2700psi |
| Diameter | 66.7in |
| Rotation | 360degrees |
| Shift Left | 30in |
| Shift Right | 29.5in |
| Max Reach Outside Tires - Left | 91in |
| Max Reach Outside Tires - Right | 90.5in |
| Max Lift Above Ground | 17in |
| Blade Tip Angle - Front | 46degrees |
| Blade Tip Angle - Rear | 13degrees |
