| Height - Bottom Of Ladder | 1.45ft in |
|---|---|
| Wheel Base | 11ft in |
| Length - With Blade On Ground | 22.58ft in |
| Ground Clearance - Bumper | 2.46ft in |
| Height - Top Of Cab | 10.91ft in |
| Height - Top Of Exhaust Pipe | 130.09in |
| Height - Top Of Hood | 93.48in |
| Ground Clearance | 1.21ft in |
| Turning Circle - With Blade | 4703.4ft in |
| Cylinders | 6 |
| Gross Power | 253hp |
| Net Power | 232hp |
| Torque Rise | 30% |
| Displacement | 537cu in |
| Bore | 4.4in |
| Stroke | 5.9in |
| Net Power - Iso 9249 | 235hp |
| Engine Model | Cat C9 ACERT |
| Flywheel Power | 232hp |
| Net Power - Eec 80/1269 | 235hp |
| Net Power - Sae J1349 (Jan90) | 232hp |
| Operating Weight | 47877lb |
| Forward - 1 | 3.6mph |
| Forward - 2 | 6.4mph |
| Forward - 3 | 11.2mph |
| Forward - 4 | 19.3mph |
| Reverse - 1 | 4.1mph |
| Reverse - 2 | 7.3mph |
| Reverse - 3 | 12.7mph |
| Reverse - 4 | 21.8mph |
| Number Of Forward Speeds | 4 |
| Number Of Reverse Speeds | 4 |
| Standard Tire Size | 26.5 R25 XHA MX L3 |
| Tires | L3 rock tread |
| Relief Valve Setting | 2255 psi |
| Front | Fixed |
| Rear | Oscillating 12 degrees |
| Lift Cylinder, Bore And Stroke | 120.62 mm x 913.9 mm 4.74 in x 35.98 in |
| Brakes | Meet OSHA regulations |
| Cooling System | 14.5gal |
| Crankcase | 9gal |
| Hydraulic Tank | 23.2gal |
| Fuel Tank - Standard | 117.8gal |
| Transmission | 13.2gal |
| Rops/Fops | Standard |
| Cab | Meets SAE and ISO standards |
| Standards | Meet required standards |
| Straight Blade - Capacity | 3.5yd3 |
| Blade Capacities | 2.66 m3 |
| Moldboard Length | 11.8ft in |
| Blade Tip Angle - Total | 51.9degrees |
| Blade Tip Angle - Forward | 10degrees |
| Blade Tip Angle - Back | 4.5degrees |
| Blade Tilt Angle - Right | 4.5degrees |
| Blade Tilt Angle - Left | 8degrees |
| Maximum Lift Above Ground | 2.4ft in |
| Straight Blade - Overall Width | 11.8ft in |
| Straight Blade - Height | 3.6ft in |
| Straight Blade - Digging Depth | 1.8ft in |
| Straight Blade - Maximum Tilt | 2.6ft in |
