| Width Over Tires | 9.19ft in |
|---|---|
| Height To Top Of Cab | 10.92ft in |
| Wheelbase | 11ft in |
| Height - Top Of Hood | 93.48in |
| Length - With Blade On Ground | 22.58ft in |
| Wheel Base | 11ft in |
| Height - Top Of Exhaust Pipe | 130.09in |
| Height - Bottom Of Ladder | 1.45ft in |
| Ground Clearance - Bumper | 2.46ft in |
| Height - Top Of Cab | 10.91ft in |
| Ground Clearance | 1.47ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Gross Power | 254hp |
| Net Power | 240hp |
| Power Measured @ | 2100rpm |
| Torque Rise | 45% |
| Displacement | 628.6cu in |
| Bore | 5in |
| Stroke | 5.6in |
| Net Power - Iso 9249 | 240hp |
| Engine Model | Cat 3176C ATAAC |
| Flywheel Power | 240hp |
| Net Power - Eec 80/1269 | 240hp |
| Net Power - Sae J1349 (Jan90) | 240hp |
| Fuel Capacity | 117.9gal |
| Cooling System Fluid Capacity | 14.6gal |
| Engine Oil Capacity | 9gal |
| Transmission Fluid Capacity | 13.3gal |
| Front Diff Fluid Capacity | 17.2gal |
| Rear Diff Fluid Capacity | 17.2gal |
| Steering Angle | 30degrees |
| Axle Oscillation | 12degrees |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 70amps |
| Tire Size | 23.5-25-12PR |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 19.3mph |
| Max Speed - Reverse | 21.9mph |
| Forward - 1 | 3.6mph |
| Forward - 2 | 6.3mph |
| Forward - 3 | 10.9mph |
| Forward - 4 | 19.2mph |
| Reverse - 1 | 4.1mph |
| Reverse - 2 | 7.1mph |
| Reverse - 3 | 12.5mph |
| Reverse - 4 | 21.8mph |
| Operating Weight | 47877lb |
| Standard Tire Size | 23.5-25,12PR |
| Tires | 4 options available |
| Blade Capacity | 3.5yd3 |
| Relief Valve Setting | 2255 psi |
| Blade Width | 11.8ft in |
| Blade Height | 3.7ft in |
| Front | Fixed |
| Rear | Oscillating 12 degrees |
| Lift Cylinder, Bore And Stroke | 120.65 mm x 913.9 mm 4.74 in x 35.98 in |
| Brakes | Meet OSHA regulations |
| Cooling System | 14.5gal |
| Crankcase | 9gal |
| Hydraulic Tank | 23.2gal |
| Fuel Tank - Standard | 117.8gal |
| Transmission | 13.2gal |
| Rops/Fops | Meets SAE and ISO standards |
| Standards | Meet required standards |
| Straight Blade - Capacity | 3.5yd3 |
| Blade Capacities | 2.66 m3 3.49 yd3 |
| Moldboard Length | 11.8ft in |
| Blade Tip Angle - Total | 51.9degrees |
| Blade Tip Angle - Forward | 10degrees |
| Blade Tip Angle - Back | 4.5degrees |
| Blade Tilt Angle - Right | 4.5degrees |
| Blade Tilt Angle - Left | 8degrees |
| Maximum Lift Above Ground | 2.4ft in |
| Straight Blade - Overall Width | 11.8ft in |
| Straight Blade - Height | 3.6ft in |
| Straight Blade - Digging Depth | 1.8ft in |
| Straight Blade - Maximum Tilt | 2.6ft in |
