| Overall Length | 33.02ft in |
|---|---|
| Width Over Tires | 7.89ft in |
| Wheelbase | 19.44ft in |
| Rear Ground Clearance | 1.16ft in |
| Tandem Axle Wheelbase | 4.96ft in |
| Front Ground Clearance | 1.16ft in |
| Blade Base | 8.52ft in |
| Height To Top Of Isomount Cab | 10.94ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 155hp |
| Engine Make | 2236 |
| Engine Model | 3126B DITA ATAAC VHP |
| Net Power Gear 1-2 | 135hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 155hp |
| Torque Measured @ | 1000rpm |
| Max Power | 155hp |
| Net Power Gears 7-8 | 155hp |
| Net Torque Gears 7-8 | 625.5lb ft |
| Displacement | 439cu in |
| Std Operation Weight - Total | 28840lb |
| Fuel Capacity | 90gal |
| Cooling System Fluid Capacity | 10.4gal |
| Circle Gearbox Fluid Capacity | 1.8gal |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 35amps |
| Articulation Angle | 20degrees |
| Turning Radius | 24ft in |
| Transmission Type | direct drive, powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 26.1mph |
| Max Speed - Reverse | 20.6mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12.1ft in |
| Moldboard Height | 24.1in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 30.6in |
| Side Shift Left | 20.7in |
| Side Shift Right | 26in |
| Blade Pull At Max Weight | 25364.2lb |
| Blade Down Pressure | 21653.9lb |
| Pump Type | Variable piston |
| Pump Flow | 38.1gal/min |
| Relief Valve Pressure | 3500psi |
| Shift Left | 24.7in |
| Shift Right | 24.8in |
| Max Reach Outside Tires - Left | 72.5in |
| Max Reach Outside Tires - Right | 75.3in |
| Max Lift Above Ground | 18in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
