| Overall Length | 30.64ft in |
|---|---|
| Width Over Tires | 9.25ft in |
| Wheelbase | 21.19ft in |
| Rear Ground Clearance | 1.25ft in |
| Tandem Axle Wheelbase | 5.42ft in |
| Front Ground Clearance | 2.12ft in |
| Blade Base | 9.42ft in |
| Height To Top Of Isomount Cab | 10.96ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 240hp |
| Engine Make | 2236 |
| Engine Model | 3176 ATAAC |
| Net Power Gear 1-2 | 220hp |
| Power Measured @ | 2000rpm |
| Net Power Gear 5-6 | 240hp |
| Max Power | 240hp |
| Net Power Gears 7-8 | 240hp |
| Displacement | 629cu in |
| Std Operation Weight - Total | 41465lb |
| Max Operation Weight - Total | 58509lb |
| Fuel Capacity | 110gal |
| Cooling System Fluid Capacity | 12.8gal |
| Transmission Fluid Capacity | 21.6gal |
| Circle Gearbox Fluid Capacity | 1.6gal |
| Articulation Angle | 20degrees |
| Turning Radius | 25.9ft in |
| Transmission Type | direct drive, power shift, planetary |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Max Speed - Forward | 26.6mph |
| Max Speed - Reverse | 29.4mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.2ft in |
| Moldboard Width | 14ft in |
| Moldboard Height | 27.1in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 17.3in |
| Side Shift Left | 25.6in |
| Side Shift Right | 31.1in |
| Blade Pull At Max Weight | 52659.7lb |
| Blade Down Pressure | 34517.8lb |
| Pump Type | axial piston |
| Pump Flow | 64.1gal/min |
| Relief Valve Pressure | 3500psi |
| Diameter | 71.8in |
| Shift Left | 25.5in |
| Shift Right | 20.5in |
| Max Reach Outside Tires - Left | 81in |
| Max Reach Outside Tires - Right | 82in |
| Max Lift Above Ground | 16.5in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
