| Overall Length | 30ft in |
|---|---|
| Width Over Tires | 8.25ft in |
| Wheelbase | 20.43ft in |
| Front Ground Clearance | 2ft in |
| Blade Base | 8.7ft in |
| Height To Top Of Isomount Cab | 10.59ft in |
| Number Of Cylinders | 6 |
| Engine Make | 2244 |
| Engine Model | D7E |
| Power Measured @ | 1800rpm |
| Torque Measured @ | 1550rpm |
| Max Power | 225hp |
| Net Power Gears 7-8 | 225hp |
| Net Torque Gears 7-8 | 754lb ft |
| Displacement | 436cu in |
| Aspiration | Turbocharged, aftercooled |
| Std Operation Weight - Total | 36150lb |
| Max Operation Weight - Total | 47000lb |
| Oil System Fluid Capacity | 5.7gal |
| Fuel Capacity | 107gal |
| Cooling System Fluid Capacity | 8.2gal |
| Transmission Fluid Capacity | 16gal |
| Tire Size | 14:00 x 24, G-2 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 80amps |
| Turning Radius | 23.9ft in |
| Transmission Type | HTE840, Fully sequential, direct drive, Volvo powershift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 28.4mph |
| Max Speed - Reverse | 20mph |
| Wheel Lean | 18degrees |
| Oscillation - Total | 16degrees |
| Ground Clearance | 2ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 25in |
| Moldboard Thickness | 0.9in |
| Max Depth Of Cut | 31in |
| Side Shift Left | 26.5in |
| Side Shift Right | 26.5in |
| Blade Pull At Max Weight | 28260lb |
| Blade Down Pressure | 17895lb |
| Pump Type | Axial Piston Pump |
| Pump Flow | 55gal/min |
| Relief Valve Pressure | 3000psi |
| Diameter | 64in |
| Rotation | 360degrees |
| Shift Left | 30.5in |
| Shift Right | 29.5in |
| Max Reach Outside Tires - Left | 80in |
| Max Reach Outside Tires - Right | 79in |
| Blade Tip Angle - Front | 45degrees |
| Blade Tip Angle - Rear | 6degrees |
