| Number Of Tines | 36 double tines |
|---|---|
| Tine To Tine Width | 3.69ft in |
| Number Of Bars | 4 |
| Overall Length | 12.26ft in |
| Overall Width | 7.71ft in |
| Overall Height | 8.42ft in |
| Tractor Pto Power Required | 40hp |
| Weight | 3719.2lb |
| Bale Width | 3.9ft in |
| Displacement | 1106cu in |
| Bale Diameter - Min | 2.5ft in |
| Bale Diameter - Max | 5.2ft in |
| Bale Weight - Max | 1250lb |
| Bore | 5.7in |
| Stroke | 7.2in |
| Emissions | The 745 meets Tier 4 Final/Stage IV emission standards. |
| Net Power - Sae J1349 | 496hp |
| Gross Power - Sae J1995 | 511hp |
| Engine Model | Cat C18 ACERT |
| Net Power - Iso 14396 | 504hp |
| Note (3) | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
| Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, i |
| Peak Engine Torque Speed | 1200rpm |
| Number Of Belts | 6 laced |
| Belt Width | 7in |
| Forward - 1 | 3.8mph |
| Forward - 2 | 5mph |
| Forward - 3 | 7mph |
| Forward - 4 | 8.8mph |
| Forward - 5 | 11.6mph |
| Forward - 6 | 14.2mph |
| Forward - 7 | 19.6mph |
| Reverse - 1 | 4mph |
| Reverse - 2 | 9.1mph |
| Lock To Lock | 4.8 seconds @ 60 rpm |
| Forward - 8 | 23.5mph |
| Forward - 9 | 34mph |
| Rated Payload | 99648.9lb |
| Twine Type | electric |
| Twine Ball Capacity | 4 |
| Cooling System | 23.7gal |
| Fuel Tank | 145.3gal |
| Def Tank* | 5.3gal |
| Final Drive - Each | 1.3gal |
| Engine Crankcase | 13.7gal |
| Brake Cooling Tank | 17.7gal |
| Transmission - Otg | 19.8gal |
| Axles - Each | 15.8gal |
| Cab - Fops | ISO 3449 Level II 2005 |
| Cab - Rops | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
| Front Axle - Empty | 43515lb |
| Center Axle - Empty | 15309lb |
| Rear Axle - Empty | 14731lb |
| Total Empty | 73553lb |
| Front Axle - Rated Load | 13007lb |
| Center Axle - Rated Load | 38691lb |
| Rear Axle - Rated Load | 38691lb |
| Total - Rated Load | 90390lb |
| Front Axle - Loaded | 56522lb |
| Center Axle - Loaded | 54000lb |
| Rear Axle - Loaded | 53422lb |
| Total Loaded | 163942lb |
| Interior Cab | 72 dB(A) |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, wh |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Heaped (Sae 2:1) | 32.7yd3 |
| Struck | 24.2yd3 |
| Tailgate Struck | 25.5yd3 |
| Tailgate Heaped Sae 2:1 | 34.7yd3 |
| Lower (Manual) | 10 s |
| Lower (Automatic) | 10 s |
| Raise (Manual) | 12 s |
| Raise (Automatic) | 13 s |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Front | 0.3in |
| Chute | 0.6in |
| Side | 0.5in |
| Base | 0.6in |
| Note | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
| Wheel Loader: 982 - Passes | 4 |
| Wheel Loader: 980 - Passes | 4-5 |
| Wheel Loader: 972 - Passes | 4-5 |
