| Overall Length | 32.37ft in |
|---|---|
| Width Over Tires | 8.37ft in |
| Wheelbase | 19.92ft in |
| Tandem Axle Wheelbase | 5.04ft in |
| Blade Base | 835ft in |
| Height To Top Of Isomount Cab | 10.24ft in |
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 199.9hp |
| Engine Make | 2238 |
| Engine Model | SAA6D114E-3 |
| Net Power Gear 1-2 | 179.7hp |
| Power Measured @ | 1900rpm |
| Net Power Gear 5-6 | 199.9hp |
| Torque Measured @ | 1400rpm |
| Max Power | 199.9hp |
| Net Power Gears 7-8 | 199.9hp |
| Net Torque Gears 1-2 | 612.2lb ft |
| Net Torque Gears 3-4 | 719.2lb ft |
| Net Torque Gears 5-6 | 719.2lb ft |
| Net Torque Gears 7-8 | 719.2lb ft |
| Displacement | 504.7cu in |
| Aspiration | Turbocharged and air to air aftercooled |
| Std Operation Weight - Total | 34855.1lb |
| Fuel Capacity | 89.9gal |
| Cooling System Fluid Capacity | 10.5gal |
| Transmission Fluid Capacity | 11.9gal |
| Circle Gearbox Fluid Capacity | 1.4gal |
| Tire Size | low pressure, tubeless, 17.5R25 |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 90amps |
| Articulation Angle | 23degrees |
| Turning Radius | 2ft in |
| Transmission Type | Full power shift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 26.3mph |
| Max Speed - Reverse | 23.8mph |
| Wheel Lean | 20degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.7ft in |
| Moldboard Width | 12ft in |
| Moldboard Height | 26in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 32.1in |
| Side Shift Left | 32.3in |
| Side Shift Right | 32.3in |
| Pump Type | Load-sensing closed center hydraulics |
| Pump Flow | 51gal/min |
| Relief Valve Pressure | 3000psi |
| Diameter | 60.3in |
| Rotation | 360degrees |
| Shift Left | 24.7in |
| Shift Right | 24.7in |
| Max Reach Outside Tires - Left | 78.8in |
| Max Reach Outside Tires - Right | 78.8in |
| Max Lift Above Ground | 19.9in |
| Blade Tip Angle - Front | 40degrees |
| Blade Tip Angle - Rear | 5degrees |
