| Overall Length | 32.85ft in |
|---|---|
| Width Over Tires | 10.86ft in |
| Wheelbase | 23.4ft in |
| Tandem Axle Wheelbase | 6ft in |
| Blade Base | 10.18ft in |
| Height To Top Of Isomount Cab | 11.67ft in |
| Minimum Turning Radius | 25.92ft in |
| Number Of Cylinders | 6 |
| Piston Displacement | 408.3cu in |
| Engine Make | 2238 |
| Engine Model | S6D140E |
| Front Frame Structure - Height | 1.4ft in |
| Front Frame Structure - Width | 1.2ft in |
| Power Measured @ | 2100rpm |
| Max Power | 280hp |
| Net Power Gears 7-8 | 280hp |
| Displacement | 359cu in |
| Aspiration | Turbocharged Diesel engine |
| Fuel Tank - Diesel | 132.1gal |
| Hydraulic Tank | 21.2gal |
| Transmission | 6.7gal |
| Final Drive | 16.7gal |
| Tandem Housing | 50.2gal |
| Engine Oil | 10.1gal |
| Coolant | 15.4gal |
| Oil System Fluid Capacity | 10.1gal |
| Max Operation Weight - Total | 58250lb |
| Fuel Capacity | 132.1gal |
| Cooling System Fluid Capacity | 15.3gal |
| Transmission Fluid Capacity | 6.6gal |
| Tire Size | 23.5 X 25-12PR (L3) tires |
| Operating Voltage | 24V |
| Alternator Supplied Amperage | 50amps |
| Articulation Angle | 25degrees |
| Turning Radius | 26ft in |
| Transmission Type | komatsu HYDROSHIFT Transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 8 |
| Max Speed - Forward | 27.9mph |
| Max Speed - Reverse | 29.8mph |
| Total Operating Weight | 58091.9lb |
| Wheel Lean | 14.5degrees |
| Oscillation - Total | 32degrees |
| Ground Clearance | 2.3ft in |
| Maximum Lift Above Ground | 1.4ft in |
| Blade Tip Angle | 49° forward, 5 ° reverse |
| Moldboard Width | 16.2ft in |
| Moldboard Height | 31in |
| Moldboard Thickness | 1in |
| Max Depth Of Cut | 19in |
| Blade Pull At Max Weight | 30250lb |
| Pump Type | Double-acting piston-type hydraulic cylinders |
| Relief Valve Pressure | 3560psi |
| Diameter | 70in |
| Rotation | 360degrees |
| Max Reach Outside Tires - Left | 94in |
| Max Reach Outside Tires - Right | 94in |
| Max Lift Above Ground | 19in |
| Blade Tip Angle - Front | 49degrees |
| Blade Tip Angle - Rear | 5degrees |
